PORSCHE 992.1 GT3 (ARD)

ADRO AOX Aero Package — Porsche GT3

Engineered by algorithm. Validated by an F1 driver. Built for the track.

The Most Aerodynamically Advanced GT3 Kit on the Market
The GT3 was already a weapon. Porsche’s engineers have spent decades refining it. So when we set out to develop an aero package for this platform, we knew we’d have to really spend time refining and optimizing.

The ADRO AOX package for the Porsche GT3 is the result of our proprietary Aerodynamic Optimization eXperience software (AOX) — a computational system that uses advanced adjoint methods to automatically find the optimal aero geometry for a given set of objectives. In plain terms: we tell the software to maximize downforce, what the balance needs to look like, and how far the geometry can physically move — then it runs multiple CFD iterations and adjoint solver loops, incrementally moving the geometry until it finds the best possible answer. No guesswork. No design by eye. Pure optimization.

The result for the GT3 is a three-component package — AOX front lip, canards, and AOX rear wing — that transform the aerodynamic capability of the GT3 without compromising its balance or drivability.

Real World Validation
Before this kit reached production, we went to Cadwell Park in the United Kingdom for track validation with Liam Lawson — current Formula 1 driver, and someone who understands aerodynamic balance at a level most of us will never experience. The feedback from that session shaped the final calibration of the package. When an F1 driver signs off on how a car feels under aero load, you can trust what you’re investing in.

The Numbers
The AOX package delivers 2.3 times the downforce of a stock GT3 set to it’s high downforce track mode, with only a 0.28 increase in drag. On track, that translates directly into corner entry confidence, mid-corner stability, and the ability to carry much more speed through fast sweepers that would otherwise have you lifting.  We’ve seen mid corner speeds jump by 20kph+ across corners higher than 130kph, generating a real reduction in lap times.

The full system produces 2888N of downforce at 180kph — with a balance shift toward the rear (as requested by Liam and confirmed with multiple drivers on track since) that suits the GT3's natural weight distribution and mechanical grip characteristics. For serious track use, this is the configuration that unlocks the car’s true potential.

What’s In The Package

AOX Front Lip
Developed entirely through adjoint-based CFD optimization using AOX. Every surface curve, every edge angle has been computed — not estimated. Delivers a 60% downforce increase at 180 km/h with negligible balance disruption after adjusting the rear wing to compensate for the additional front load.

Canards
Precision-developed to broaden the aerodynamic pressure field across the front axle. These work to maximise the front end load and increase front balance significantly, allowing for the AOX rear wing to be run at even higher loads to rebalance the car back to it’s desired aerobalance.  It’s a win-win.

AOX Rear Wing
Optimized specifically for the GT3 using the same AOX methodology as the front lip — but here the target was maximum downforce-to-drag efficiency at the highest wing setting to balance the new found load from the AOX front lip and canards. The result is a wing that produces significantly more downforce than a conventionally designed wing at the same physical angle of attack, because the profile itself has been mathematically solved for the exact onset flow and downforce/drag targets.

Who This Is For
If you track your GT3 and you’re serious about lap times, this package will change what the car feels like at speed: more downforce means more grip, more grip means higher corner speeds, higher corner speeds results in better lap times.

If you’re often at the track or want the ultimate GT3, the full AOX package in MAX configuration gives you a level of aerodynamic capability that simply doesn’t exist elsewhere in the market for this platform.

This is what ADRO is all about.  This is why we developed the AOX software in-house. And this is what happens when F1 methodology meets the GT3.  See you at the track!

ADRO AOX Aero Package — Porsche GT3

Engineered by algorithm. Validated by an F1 driver. Built for the track.

The Most Aerodynamically Advanced GT3 Kit on the Market
The GT3 was already a weapon. Porsche’s engineers have spent decades refining it. So when we set out to develop an aero package for this platform, we knew we’d have to really spend time refining and optimizing.

The ADRO AOX package for the Porsche GT3 is the result of our proprietary Aerodynamic Optimization eXperience software (AOX) — a computational system that uses advanced adjoint methods to automatically find the optimal aero geometry for a given set of objectives. In plain terms: we tell the software to maximize downforce, what the balance needs to look like, and how far the geometry can physically move — then it runs multiple CFD iterations and adjoint solver loops, incrementally moving the geometry until it finds the best possible answer. No guesswork. No design by eye. Pure optimization.

The result for the GT3 is a three-component package — AOX front lip, canards, and AOX rear wing — that transform the aerodynamic capability of the GT3 without compromising its balance or drivability.

Real World Validation
Before this kit reached production, we went to Cadwell Park in the United Kingdom for track validation with Liam Lawson — current Formula 1 driver, and someone who understands aerodynamic balance at a level most of us will never experience. The feedback from that session shaped the final calibration of the package. When an F1 driver signs off on how a car feels under aero load, you can trust what you’re investing in.

The Numbers
The AOX package delivers 2.3 times the downforce of a stock GT3 set to it’s high downforce track mode, with only a 0.28 increase in drag. On track, that translates directly into corner entry confidence, mid-corner stability, and the ability to carry much more speed through fast sweepers that would otherwise have you lifting.  We’ve seen mid corner speeds jump by 20kph+ across corners higher than 130kph, generating a real reduction in lap times.

The full system produces 2888N of downforce at 180kph — with a balance shift toward the rear (as requested by Liam and confirmed with multiple drivers on track since) that suits the GT3's natural weight distribution and mechanical grip characteristics. For serious track use, this is the configuration that unlocks the car’s true potential.

What’s In The Package

AOX Front Lip
Developed entirely through adjoint-based CFD optimization using AOX. Every surface curve, every edge angle has been computed — not estimated. Delivers a 60% downforce increase at 180 km/h with negligible balance disruption after adjusting the rear wing to compensate for the additional front load.

Canards
Precision-developed to broaden the aerodynamic pressure field across the front axle. These work to maximise the front end load and increase front balance significantly, allowing for the AOX rear wing to be run at even higher loads to rebalance the car back to it’s desired aerobalance.  It’s a win-win.

AOX Rear Wing
Optimized specifically for the GT3 using the same AOX methodology as the front lip — but here the target was maximum downforce-to-drag efficiency at the highest wing setting to balance the new found load from the AOX front lip and canards. The result is a wing that produces significantly more downforce than a conventionally designed wing at the same physical angle of attack, because the profile itself has been mathematically solved for the exact onset flow and downforce/drag targets.

Who This Is For
If you track your GT3 and you’re serious about lap times, this package will change what the car feels like at speed: more downforce means more grip, more grip means higher corner speeds, higher corner speeds results in better lap times.

If you’re often at the track or want the ultimate GT3, the full AOX package in MAX configuration gives you a level of aerodynamic capability that simply doesn’t exist elsewhere in the market for this platform.

This is what ADRO is all about.  This is why we developed the AOX software in-house. And this is what happens when F1 methodology meets the GT3.  See you at the track!

Engineered by algorithm. Validated by an F1 driver. Built for the track.
The GT3 was already a weapon. Porsche's engineers have spent decades refining it — so when we set out to develop an aero package for this platform, we knew the bar was already high.


The Technology
The ADRO ARD program for the Porsche 992.1 GT3 is the result of our proprietary Aerodynamic Optimization eXperience software AOX. It's a computational system built around advanced adjoint methods that automatically finds the optimal aero geometry for a given set of objectives. In plain terms: we define the downforce targets, the balance requirements, and the physical constraints. AOX handles the rest running successive CFD iterations and adjoint solver loops, incrementally refining the geometry until it converges on the best possible answer. No guesswork. No design by eye. Pure optimization.

Dial in a sharper front end look and add functional aero to your 992.1 GT3. ADRO prepreg carbon fiber canards are designed specifically for the GT3 front bumper to complement the factory lines while adding a purposeful, track focused touch. Built from high quality prepreg carbon fiber with a clean weave and crisp edges, these canards are lightweight, rigid, and made to fit with confidence.

Whether you’re chasing consistency through high speed corners or just want a more aggressive front profile, these canards deliver a performance driven upgrade with a straightforward install. Elevate your 992.1 GT3 with an OEM plus aero detail that looks right on the street and feels at home on track.

Transform your 992 GT3 with the ADRO Carbon Fiber Side Skirts.

Expertly crafted to enhance your vehicle's aerodynamics and aesthetics, these side skirts deliver a race-inspired, aggressive look while ensuring a flawless factory fit.

Key Features:

• Full Prepreg Carbon Fiber Construction: Premium materials provide strength, durability, and a sleek, lightweight finish.
• Aggressive Redesign: Boldly styled to complement the 992 GT3's high-performance design.
• Enhanced Stance: Achieve a lower, wider profile that commands attention on the road or track.
• Performance-Focused Design: Precision-engineered sharp angles for improved aerodynamics and visual appeal.
• Seamless Integration: Mounts directly to existing OEM locations for an effortless installation.

Elevate your 992 GT3 with the ADRO Carbon Fiber Rear Diffuser & Apron Panel.

Inspired by the demands of motorsport, this precision-engineered upgrade combines cutting-edge aerodynamics with bold aesthetics to elevate your GT3's track presence while maintaining seamless factory fitment.

Key Features:

• Motorsport-Grade Prepreg Carbon Fiber: Lightweight yet incredibly strong for optimal performance and durability.
• CFD-Optimized Aerodynamics: Designed using Computational Fluid Dynamics (CFD) to enhance airflow, reduce drag, and improve rear-end stability.
• Aggressive Redesign: The reimagined Rear Diffuser and Apron Panel add a race-ready edge to the GT3's rear profile.
• Track-Inspired Functionality: Sharp angles and airflow channels work to maximize downforce and improve cornering grip.
• Enhanced Rear Stance: Delivers a commanding, wide presence that echoes its track dominance.
• Seamless Integration: Fits directly to existing OEM mounting points for an effortless upgrade.

Elevate your 992 GT3 with the ADRO Carbon Fiber Rear Apron Panel.

Inspired by the demands of motorsport, this precision-engineered upgrade combines cutting-edge aerodynamics with bold aesthetics to elevate your GT3's track presence while maintaining seamless factory fitment.

Key Features:

• Motorsport-Grade Prepreg Carbon Fiber: Lightweight yet incredibly strong for optimal performance and durability.
• CFD-Optimized Aerodynamics: Designed using Computational Fluid Dynamics (CFD) to enhance airflow, reduce drag, and improve rear-end stability.
• Aggressive Redesign: The reimagined Rear Diffuser and Apron Panel add a race-ready edge to the GT3's rear profile.
• Track-Inspired Functionality: Sharp angles and airflow channels work to maximize downforce and improve cornering grip.
• Enhanced Rear Stance: Delivers a commanding, wide presence that echoes its track dominance.
• Seamless Integration: Fits directly to existing OEM mounting points for an effortless upgrade.